Michelin respond to the needs of mine operators by incorporating three key innovations in the new XDR3
The new 40.00 R 57 and 53/80 R 63 Michelin XDR3 tyres have been designed for rigid dump trucks operating in surface mines. One of the main challenges facing mine operators today is to reduce the cost per tonne by improving operational efficiency, while still ensuring safety for all within the workplace, and thus increasing profitability.
The new Michelin tyre responds to the needs of mine operators by incorporating three key innovations, which together increase tyre life by a minimum of 10 per cent compared to its predecessor, the XDR2.
Compared with the XDR2, its predecessor, this new tread pattern offers a number of benefits. It offers increased endurance due to improved heat dissipation capabilities which Michelin claim to be up to 8?C cooler in the tread area. A greater volume of tread rubber is in contact with the ground which improves wear and ensures better load distribution throughout the contact area due to a lower contact pressure. Finally, interlocking shoulder blocks resist excessive movement during cornering and further reduce tyre wear.
Also, an exclusive new mixing process ensures a more uniform composition of rubber compounds and a superior level of carbon black dispersion. This increases wear resistance. Each unique compound offers specific performance characteristics adapted to site conditions and usage, from high wear resistance to high thermal capacity for speed.
Inside the XDR3 are steel cables. These high-strength steel cables that used in the tyre?s casing are 10 per cent stronger than in the XDR2 and are encapsulated in rubber to prevent the spread of corrosion within the casing, which extends the life of the tyre.
The MICHELIN XDR3 is also MEMS (1) ready. This means that it is possible to quickly and easily install state-of-the-art data sensors to capture and transmit temperature and pressure information in real time.
Michelin?s research and development teams have spent more than six years developing the new tyre to ensure that it fully meets the expectations and needs of customers. During the extensive testing process more than 25mn km were travelled, which is the equivalent of circling the earth 625 times.
The 40.00 R57 MICHELIN XDR3 is now available, while the 53/80 R63 will be available from January 2017.
